% DOTGOV WHOIS Server ready
Domain Name: NIH.GOV
Status: ACTIVE
Security Contact Email: ResponsibleDisclosure@hhs.gov
>>> Last update of whois database: 2022-07-28T23:17:07Z <<<
Please be advised that this whois server only contains information pertaining
to the .GOV domain. For information for other domains please use the whois
server at RS.INTERNIC.NET.
Cached: 2022.07.28 23:14:31/ 2 years 3 months ago
www.nimh.nih.gov has address 137.187.52.151www.nimh.nih.gov has IPv6 address 2607:f220:404:129::89bb:3497
No results found, please run it to get the result.
No results found, please run it to get the result.
No results found, please run it to get the result.
Cached: 2022.07.28 22:47:41/ 2 years 3 months ago
traceroute to www.nimh.nih.gov (137.187.52.151), 30 hops max, 60 byte packets
1 gateway (172.31.1.1) 8.377 ms 8.322 ms 8.327 ms
2 16781.your-cloud.host (49.12.139.252) 0.590 ms 0.592 ms 0.588 ms
3 * * *
4 static.88.198.133.233.clients.your-server.de (88.198.133.233) 1.396 ms static.88.198.133.237.clients.your-server.de (88.198.133.237) 1.548 ms static.88.198.133.233.clients.your-server.de (88.198.133.233) 1.743 ms
5 spine12.cloud1.nbg1.hetzner.com (78.47.3.41) 1.372 ms spine14.cloud1.nbg1.hetzner.com (213.133.113.69) 1.646 ms spine12.cloud1.nbg1.hetzner.com (78.47.3.45) 1.724 ms
6 213-239-239-121.clients.your-server.de (213.239.239.121) 1.007 ms static.213-133-112-65.clients.your-server.de (213.133.112.65) 0.661 ms static.213-133-112-69.clients.your-server.de (213.133.112.69) 0.924 ms
7 core23.fsn1.hetzner.com (213.239.203.122) 15.428 ms core24.fsn1.hetzner.com (213.239.203.126) 2.688 ms 2.806 ms
8 juniper4.dc1.fsn1.hetzner.com (213.239.203.130) 3.323 ms 213-239-203-114.clients.your-server.de (213.239.203.114) 2.841 ms juniper4.dc1.fsn1.hetzner.com (213.239.203.130) 2.732 ms
9 ae55.edge5.Berlin1.Level3.net (62.67.27.9) 9.586 ms ae54.edge5.Berlin1.Level3.net (62.67.27.5) 9.857 ms ae55.edge5.Berlin1.Level3.net (62.67.27.9) 9.425 ms
10 * * *
11 4.16.68.166 (4.16.68.166) 101.199 ms 101.346 ms 100.979 ms
12 bth-tic-core-rt-a-te-0-0-0-0.net.nih.gov (156.40.93.1) 100.704 ms 102.177 ms 100.755 ms
13 156.40.93.170 (156.40.93.170) 100.040 ms 101.327 ms 99.995 ms
14 156.40.93.171 (156.40.93.171) 100.505 ms 100.111 ms 100.002 ms
15 * * *
16 * * *
17 * * *
18 * * *
19 * * *
20 * * *
21 * * *
22 * * *
23 * * *
24 * * *
25 * * *
26 * * *
27 * * *
28 * * *
29 * * *
30 * * *
No results found, please run it to get the result.
Search for references
This is the search mode - you can use it to find references to any host in our cache. Just type the specified host and hit enter or click the button.
Nslookup arguments and description
NSLOOKUP is a programm for querying NS server for a specified domain. This tool is commonly used for detecting the IP address of the domain (A record), but can be used for receiving other NS records. It is very similar to DIG command. Unlike DIG, NSLOOKUP is based on its own resolver library.
Host
Requierd argument, specifies the host about which is querying the information.
NS server
Optional argument, specifies which NS server to query.
Type
Port
Optional argument, specifies the NS server port (53 by default)
Debug
Debug2
Ping arguments and description
PING is the network command, which lets you check whether or not the host is alive and responding. The special protocol ICMP is used for pinging. See RFC 792 for ICMP protocol details. You can find the command arguments below.
Host
Requierd argument, can be an IP or domain name.
Protocol
Packet size
By default it is 56 bytes, which translates into 64 ICMP data bytes (8 bytes of ICMP header are added)
Map IP
MTU
Timestamp
Whois arguments and description
WHOIS searches Whois servers for the object (domain or IP). The special WHOIS protocol is used for querying the Whois servers. See RFC 3912 for the protocol specification. This command is available on all linux systems and has a lot of arguments. The most important argument is host address. See the arguments decription below.
Host
Requierd argument, can be an IP or domain name.
Host arguments and description
HOST is a DNS lookup utility. You can use it to convert names to IP addresses and vice versa. It is similar to DIG and NSLOOKUP. This command is available on all linux distributives. There are several arguments. You can find decription of the arguments below.
Host
Requierd argument, can be an IP or domain name.
NS server
Optional argument, can be an IP or domain of name server
Protocol
Type
All
Verbose mode
Traceroute arguments and description
TRACEROUTE is the network diagnostic command. This command tracks the route packets taken from an IP network on their way to a given host. ICMP or UDP packets are used. See the command arguments below.
Host
Requierd argument, can be an IP or domain name.
Fragmentation
ICMP
TCP
Map IP
Protocol
Port
For UDP specifies the destination port
Geoiplookup arguments and description
GEOIPLOOKUP lets you detect the location of a host. A preparsed WHOIS database is used for detecting the location of IP or domain. There are a lot of independent geoip databases in the Internet, so the same host can have different locations in those databases. GEOIPLOOKUP is not a built-in Linux command. The command has only one argument - host address.
Host
Requierd argument, can be an IP address only
Dig arguments and description
The DIG command is a part of BIND package, available on all linux distributives. It is used for querying Domain Name Servers (DNS) using standard operating system libraries and display answers from these DNS servers. Domain Information Groper (DIG) is useful for troubleshooting DNS issues. You can find DIG arguments below.
Host
Requierd argument, can be an IP or domain name.
NS server
Requierd argument, can be an IP or domain name.
Type
Trace
Tcp
Ignore
AA only
AD flag
CD flag
Show class
Show TTL
Answer
Comments
Recurse
Short
Cmd
Identify
Stats
Authority
Additional
All
Multiline
One SOA
Fail
Best effort
DNSSEC
EDNS ID request
Cached: 2022.07.28 23:14:31/ 2 years 3 months ago
www.nimh.nih.gov has address 137.187.52.151www.nimh.nih.gov has IPv6 address 2607:f220:404:129::89bb:3497