Domain:
reset.gg
Domain Status:
Active
Transfer Prohibited by Registrar
Registrant:
Reset
Registrar:
Gandi SAS (http://www.gandi.net)
Relevant dates:
Registered on 19th November 2016 at 22:47:00.223
Registry fee due on 19th November each year
Registration status:
Registered until cancelled
Name servers:
ns-189-c.gandi.netns-42-a.gandi.netns-43-b.gandi.net
WHOIS lookup made on Wed, 2 Nov 2022 at 4:47:55 GMT
This WHOIS information is provided for free by CIDR, operator of
the backend registry for domain names ending in GG, JE, and AS.
Copyright (c) and database right Island Networks 1996 - 2022.
You may not access this WHOIS server or use any data from it except
as permitted by our Terms and Conditions which are published
at http://www.channelisles.net/legal/whoisterms
They include restrictions and prohibitions on
- using or re-using the data for advertising;
- using or re-using the service for commercial purposes without a licence;
- repackaging, recompilation, redistribution or reuse;
- obscuring, removing or hiding any or all of this notice;
- exceeding query rate or volume limits.
The data is provided on an 'as-is' basis and may lag behind the
register. Access may be withdrawn or restricted at any time.
Cached: 2022.11.08 05:53:04/ 1 year 10 months ago
Host i.reset.gg not found: 3(NXDOMAIN)
No results found, please run it to get the result.
No results found, please run it to get the result.
No results found, please run it to get the result.
Cached: 2022.11.02 04:34:58/ 1 year 10 months ago
traceroute to i.reset.gg (185.83.214.222), 30 hops max, 60 byte packets
1 gateway (172.31.1.1) 8.185 ms 8.104 ms 7.889 ms
2 13700.your-cloud.host (116.203.163.39) 0.391 ms 0.417 ms 0.393 ms
3 * * *
4 static.88-198-250-9.clients.your-server.de (88.198.250.9) 1.437 ms static.88-198-250-13.clients.your-server.de (88.198.250.13) 1.220 ms static.88-198-250-9.clients.your-server.de (88.198.250.9) 1.693 ms
5 spine12.cloud1.nbg1.hetzner.com (78.47.3.45) 1.585 ms 1.385 ms spine13.cloud1.nbg1.hetzner.com (213.133.113.65) 1.357 ms
6 static.213-133-112-85.clients.your-server.de (213.133.112.85) 1.054 ms 213-239-239-141.clients.your-server.de (213.239.239.141) 0.806 ms static.213-133-112-77.clients.your-server.de (213.133.112.77) 3.225 ms
7 core0.fra.hetzner.com (213.239.252.25) 24.754 ms core1.fra.hetzner.com (213.239.245.254) 3.501 ms 3.420 ms
8 core10.ams.hetzner.com (213.239.203.45) 9.080 ms core10.ams.hetzner.com (213.239.203.49) 43.444 ms core10.ams.hetzner.com (213.239.203.41) 43.428 ms
9 185.1.240.9.era-ix.net (185.1.240.9) 9.127 ms 9.031 ms 8.936 ms
10 * * *
11 mxcore1.dc2.irb.2102.k10.terrahost.no (185.125.170.112) 34.148 ms 33.983 ms 34.101 ms
12 185.125.170.125 (185.125.170.125) 50.843 ms 50.807 ms 50.813 ms
13 * * *
14 * * *
15 * * *
16 * * *
17 * * *
18 * * *
19 * * *
20 * * *
21 * * *
22 * * *
23 * * *
24 * * *
25 * * *
26 * * *
27 * * *
28 * * *
29 * * *
30 * * *
No results found, please run it to get the result.
Search for references
This is the search mode - you can use it to find references to any host in our cache. Just type the specified host and hit enter or click the button.
Nslookup arguments and description
NSLOOKUP is a programm for querying NS server for a specified domain. This tool is commonly used for detecting the IP address of the domain (A record), but can be used for receiving other NS records. It is very similar to DIG command. Unlike DIG, NSLOOKUP is based on its own resolver library.
Host
Requierd argument, specifies the host about which is querying the information.
NS server
Optional argument, specifies which NS server to query.
Type
Port
Optional argument, specifies the NS server port (53 by default)
Debug
Debug2
Ping arguments and description
PING is the network command, which lets you check whether or not the host is alive and responding. The special protocol ICMP is used for pinging. See RFC 792 for ICMP protocol details. You can find the command arguments below.
Host
Requierd argument, can be an IP or domain name.
Protocol
Packet size
By default it is 56 bytes, which translates into 64 ICMP data bytes (8 bytes of ICMP header are added)
Map IP
MTU
Timestamp
Whois arguments and description
WHOIS searches Whois servers for the object (domain or IP). The special WHOIS protocol is used for querying the Whois servers. See RFC 3912 for the protocol specification. This command is available on all linux systems and has a lot of arguments. The most important argument is host address. See the arguments decription below.
Host
Requierd argument, can be an IP or domain name.
Host arguments and description
HOST is a DNS lookup utility. You can use it to convert names to IP addresses and vice versa. It is similar to DIG and NSLOOKUP. This command is available on all linux distributives. There are several arguments. You can find decription of the arguments below.
Host
Requierd argument, can be an IP or domain name.
NS server
Optional argument, can be an IP or domain of name server
Protocol
Type
All
Verbose mode
Traceroute arguments and description
TRACEROUTE is the network diagnostic command. This command tracks the route packets taken from an IP network on their way to a given host. ICMP or UDP packets are used. See the command arguments below.
Host
Requierd argument, can be an IP or domain name.
Fragmentation
ICMP
TCP
Map IP
Protocol
Port
For UDP specifies the destination port
Geoiplookup arguments and description
GEOIPLOOKUP lets you detect the location of a host. A preparsed WHOIS database is used for detecting the location of IP or domain. There are a lot of independent geoip databases in the Internet, so the same host can have different locations in those databases. GEOIPLOOKUP is not a built-in Linux command. The command has only one argument - host address.
Host
Requierd argument, can be an IP address only
Dig arguments and description
The DIG command is a part of BIND package, available on all linux distributives. It is used for querying Domain Name Servers (DNS) using standard operating system libraries and display answers from these DNS servers. Domain Information Groper (DIG) is useful for troubleshooting DNS issues. You can find DIG arguments below.
Host
Requierd argument, can be an IP or domain name.
NS server
Requierd argument, can be an IP or domain name.
Type
Trace
Tcp
Ignore
AA only
AD flag
CD flag
Show class
Show TTL
Answer
Comments
Recurse
Short
Cmd
Identify
Stats
Authority
Additional
All
Multiline
One SOA
Fail
Best effort
DNSSEC
EDNS ID request
Cached: 2022.11.02 04:34:58/ 1 year 10 months ago
traceroute to i.reset.gg (185.83.214.222), 30 hops max, 60 byte packets
1 gateway (172.31.1.1) 8.185 ms 8.104 ms 7.889 ms
2 13700.your-cloud.host (116.203.163.39) 0.391 ms 0.417 ms 0.393 ms
3 * * *
4 static.88-198-250-9.clients.your-server.de (88.198.250.9) 1.437 ms static.88-198-250-13.clients.your-server.de (88.198.250.13) 1.220 ms static.88-198-250-9.clients.your-server.de (88.198.250.9) 1.693 ms
5 spine12.cloud1.nbg1.hetzner.com (78.47.3.45) 1.585 ms 1.385 ms spine13.cloud1.nbg1.hetzner.com (213.133.113.65) 1.357 ms
6 static.213-133-112-85.clients.your-server.de (213.133.112.85) 1.054 ms 213-239-239-141.clients.your-server.de (213.239.239.141) 0.806 ms static.213-133-112-77.clients.your-server.de (213.133.112.77) 3.225 ms
7 core0.fra.hetzner.com (213.239.252.25) 24.754 ms core1.fra.hetzner.com (213.239.245.254) 3.501 ms 3.420 ms
8 core10.ams.hetzner.com (213.239.203.45) 9.080 ms core10.ams.hetzner.com (213.239.203.49) 43.444 ms core10.ams.hetzner.com (213.239.203.41) 43.428 ms
9 185.1.240.9.era-ix.net (185.1.240.9) 9.127 ms 9.031 ms 8.936 ms
10 * * *
11 mxcore1.dc2.irb.2102.k10.terrahost.no (185.125.170.112) 34.148 ms 33.983 ms 34.101 ms
12 185.125.170.125 (185.125.170.125) 50.843 ms 50.807 ms 50.813 ms
13 * * *
14 * * *
15 * * *
16 * * *
17 * * *
18 * * *
19 * * *
20 * * *
21 * * *
22 * * *
23 * * *
24 * * *
25 * * *
26 * * *
27 * * *
28 * * *
29 * * *
30 * * *