Domain:
gov.je
Domain Status:
Active
Registrant:
Redacted for privacy
Registrar:
Government of Jersey (http://www.gov.je)
Relevant dates:
Registered on 31st December 1996 at 00:00:00.000
Registry fee due on 31st December each year
Registration status:
Registered until cancelled
Name servers:
ns1.gov.jens2.gov.je
WHOIS lookup made on Wed, 24 May 2023 at 19:13:27 BST
This WHOIS information is provided for free by CIDR, operator of
the backend registry for domain names ending in GG, JE, and AS.
Copyright (c) and database right Island Networks (Jersey) 1996 - 2023.
You may not access this WHOIS server or use any data from it except
as permitted by our Terms and Conditions which are published
at http://www.channelisles.net/legal/whoisterms
They include restrictions and prohibitions on
- using or re-using the data for advertising;
- using or re-using the service for commercial purposes without a licence;
- repackaging, recompilation, redistribution or reuse;
- obscuring, removing or hiding any or all of this notice;
- exceeding query rate or volume limits.
The data is provided on an 'as-is' basis and may lag behind the
register. Access may be withdrawn or restricted at any time.
No results found, please run it to get the result.
No results found, please run it to get the result.
No results found, please run it to get the result.
No results found, please run it to get the result.
Cached: 2024.02.10 18:33:13/ 3 months 8 days ago
traceroute to gov.je (52.156.194.171), 30 hops max, 60 byte packets
1 gateway (172.31.1.1) 2.483 ms 2.461 ms 2.462 ms
2 21716.your-cloud.host (49.12.143.144) 0.266 ms 0.271 ms 0.263 ms
3 * * *
4 static.89.143.12.49.clients.your-server.de (49.12.143.89) 1.180 ms static.93.143.12.49.clients.your-server.de (49.12.143.93) 1.069 ms static.89.143.12.49.clients.your-server.de (49.12.143.89) 1.212 ms
5 * * *
6 core12.nbg1.hetzner.com (213.239.239.141) 0.748 ms core11.nbg1.hetzner.com (213.239.203.101) 0.589 ms 0.541 ms
7 core4.fra.hetzner.com (213.239.245.245) 3.602 ms core4.fra.hetzner.com (213.239.245.33) 3.884 ms core4.fra.hetzner.com (213.239.245.245) 3.879 ms
8 ae74-0.ier01.fra32.ntwk.msn.net (104.44.197.103) 3.608 ms ae69-0.ier02.fra32.ntwk.msn.net (104.44.37.193) 4.276 ms 4.187 ms
9 ae22-0.icr01.fra23.ntwk.msn.net (104.44.230.16) 12.376 ms ae22-0.icr02.fra23.ntwk.msn.net (104.44.230.20) 28.255 ms 3.951 ms
10 be-100-0.ibr01.fra23.ntwk.msn.net (104.44.20.186) 47.144 ms be-100-0.ibr01.fra21.ntwk.msn.net (104.44.23.103) 47.937 ms be-100-0.ibr01.fra23.ntwk.msn.net (104.44.20.186) 43.665 ms
11 be-8-0.ibr02.ams30.ntwk.msn.net (104.44.28.123) 24.321 ms be-2-0.ibr02.vie20.ntwk.msn.net (104.44.30.98) 37.217 ms 38.137 ms
12 be-7-0.ibr02.dub07.ntwk.msn.net (104.44.17.58) 24.519 ms be-8-0.ibr03.vie.ntwk.msn.net (104.44.19.16) 44.603 ms be-3-0.ibr04.vie.ntwk.msn.net (104.44.30.102) 37.776 ms
13 ae104-0.icr03.dub07.ntwk.msn.net (104.44.23.153) 23.345 ms ae126-0.icr04.dub07.ntwk.msn.net (104.44.23.159) 24.892 ms ae100-0.icr01.dub07.ntwk.msn.net (104.44.11.60) 31.873 ms
14 be-5-0.ibr02.lon24.ntwk.msn.net (104.44.29.35) 79.088 ms 77.250 ms *
15 be-6-0.ibr02.dub08.ntwk.msn.net (104.44.30.59) 37.312 ms * *
16 * ae100-0.icr01.dub08.ntwk.msn.net (104.44.11.70) 42.954 ms ae124-0.icr03.dub08.ntwk.msn.net (104.44.23.173) 36.388 ms
17 * * *
18 * * *
19 * * *
20 * * *
21 * * *
22 * * *
23 * * *
24 * * *
25 * * *
26 * * *
27 * * *
28 * * *
29 * * *
30 * * *
No results found, please run it to get the result.
Search for references
This is the search mode - you can use it to find references to any host in our cache. Just type the specified host and hit enter or click the button.
Nslookup arguments and description
NSLOOKUP is a programm for querying NS server for a specified domain. This tool is commonly used for detecting the IP address of the domain (A record), but can be used for receiving other NS records. It is very similar to DIG command. Unlike DIG, NSLOOKUP is based on its own resolver library.
Host
Requierd argument, specifies the host about which is querying the information.
NS server
Optional argument, specifies which NS server to query.
Type
Port
Optional argument, specifies the NS server port (53 by default)
Debug
Debug2
Ping arguments and description
PING is the network command, which lets you check whether or not the host is alive and responding. The special protocol ICMP is used for pinging. See RFC 792 for ICMP protocol details. You can find the command arguments below.
Host
Requierd argument, can be an IP or domain name.
Protocol
Packet size
By default it is 56 bytes, which translates into 64 ICMP data bytes (8 bytes of ICMP header are added)
Map IP
MTU
Timestamp
Whois arguments and description
WHOIS searches Whois servers for the object (domain or IP). The special WHOIS protocol is used for querying the Whois servers. See RFC 3912 for the protocol specification. This command is available on all linux systems and has a lot of arguments. The most important argument is host address. See the arguments decription below.
Host
Requierd argument, can be an IP or domain name.
Host arguments and description
HOST is a DNS lookup utility. You can use it to convert names to IP addresses and vice versa. It is similar to DIG and NSLOOKUP. This command is available on all linux distributives. There are several arguments. You can find decription of the arguments below.
Host
Requierd argument, can be an IP or domain name.
NS server
Optional argument, can be an IP or domain of name server
Protocol
Type
All
Verbose mode
Traceroute arguments and description
TRACEROUTE is the network diagnostic command. This command tracks the route packets taken from an IP network on their way to a given host. ICMP or UDP packets are used. See the command arguments below.
Host
Requierd argument, can be an IP or domain name.
Fragmentation
ICMP
TCP
Map IP
Protocol
Port
For UDP specifies the destination port
Geoiplookup arguments and description
GEOIPLOOKUP lets you detect the location of a host. A preparsed WHOIS database is used for detecting the location of IP or domain. There are a lot of independent geoip databases in the Internet, so the same host can have different locations in those databases. GEOIPLOOKUP is not a built-in Linux command. The command has only one argument - host address.
Host
Requierd argument, can be an IP address only
Dig arguments and description
The DIG command is a part of BIND package, available on all linux distributives. It is used for querying Domain Name Servers (DNS) using standard operating system libraries and display answers from these DNS servers. Domain Information Groper (DIG) is useful for troubleshooting DNS issues. You can find DIG arguments below.
Host
Requierd argument, can be an IP or domain name.
NS server
Requierd argument, can be an IP or domain name.
Type
Trace
Tcp
Ignore
AA only
AD flag
CD flag
Show class
Show TTL
Answer
Comments
Recurse
Short
Cmd
Identify
Stats
Authority
Additional
All
Multiline
One SOA
Fail
Best effort
DNSSEC
EDNS ID request
Domain:
gov.je
Domain Status:
Active
Registrant:
Redacted for privacy
Registrar:
Government of Jersey (http://www.gov.je)
Relevant dates:
Registered on 31st December 1996 at 00:00:00.000
Registry fee due on 31st December each year
Registration status:
Registered until cancelled
Name servers:
ns1.gov.jens2.gov.je
WHOIS lookup made on Wed, 24 May 2023 at 19:13:27 BST
This WHOIS information is provided for free by CIDR, operator of
the backend registry for domain names ending in GG, JE, and AS.
Copyright (c) and database right Island Networks (Jersey) 1996 - 2023.
You may not access this WHOIS server or use any data from it except
as permitted by our Terms and Conditions which are published
at http://www.channelisles.net/legal/whoisterms
They include restrictions and prohibitions on
- using or re-using the data for advertising;
- using or re-using the service for commercial purposes without a licence;
- repackaging, recompilation, redistribution or reuse;
- obscuring, removing or hiding any or all of this notice;
- exceeding query rate or volume limits.
The data is provided on an 'as-is' basis and may lag behind the
register. Access may be withdrawn or restricted at any time.